CoolStack® Installation Manual | Version 2022Mar_TW
Page 14
Installation:
COOLSTACK® COMPACT on C-profile
C-Profile Mounting Step
Step. 1 -Hooks
Slide the C-profile hooks from top to bottom over
the C-profile.The distance between two hook is
110mm. Maximal C-profile width for standard
hook is 50mm. Maximal C-profile height for
standard hooks = 75mm, If your C-profile excess
these sizes width 50mm or height 75mm please
contact us for customized hooks.
Step. 2 Lamp on hooks
Hang the lamp onto the hooks and fine-tune its
position.
Step. 3A Driver mounting (Standard)
Install Install the driver beside the lamp with self
tapping screws. Properly position it before fixing it
on the c-profile bar.
Step. 3B Driver mounting (Hooks, optional)
Slide driver into wire hook while bending it to
align one hole (on dirver), guide the other end of
wire hook into the other driver hole.
Place the driver and hook onto C-profile.
Check the driver connection status and make sure
the driver is not connected to the outer electric
supply source before going to the next steps
Step. 4 Driver to lamp connection
Mount the driver output cable (910mm) to the
lamp input.
Tighten the connector by turning the lock
clockwise.
Driver
Lamp
-
8
Hook
pin
thru
this
hole
