MECHAPRO Slider SFX, Руководство пользователя

Страница: 7 / 24

Manual Slider SFX Page 7
2 Start of operation
Please make sure to follow all protective regulations before the first initial operation of the
board and before connecting or switching on the supply voltage.
On the
Slider SFX
board all connections are equipped with pluggable cage clamps. All
connectors will be described in the following sections. The sketch gives a first overview. All
relevant connections and settings are marked in grey.
On all connections care should be taken to achieve the
best possible contact. All signal and motor wires should be
be equipped with core cable ends. To avoid disturbances
especially on the switch inputs on X7, shielded and/or
twisted pair wires have to be used.