NEED HELP? 1-800-832-2966
11
ASSEMBLY INSTRUCTIONS
Unboxing the Cultivator
➢
The cultivator comes with the majority of assembly completed.
➢
Remove all parts and packaging components.
➢
Use a utility knife to cut all four vertical edges and lay the box side panels flat around the cultivator.
➢
Remove any remaining packaging.
➢
Assembly can be done sitting on the cardboard to protect the finish.
Handlebars (Middle)
1) Make sure the wheels are locked in the transport position for the most
stable platform.
2) Slide the middle handle over the lower handle with the bend facing the
back of the machine.
3) Secure the middle handle to the lower handle using (2) saddle bolts
and handle knobs (one per side).
Handlebars (upper)
1) Make sure the wheels are locked in the transport position for the most
stable platform.
2) The upper handle bars are directional. The throttle should be on the right-
hand side when facing the back of the machine.
3) The upper handle bars are shaped. Ensure the concave portion of the
bar rests tightly against the middle handle and align the holes.
4) Use (1) saddle bolt and knob per side to secure the upper handle bar to
the middle handle.
5) Secure throttle cable to handlebar assembly using the provided zip ties.
Middle Handle
Saddle
Bolt &
Knob
Lower
Handle
Upper Handles
