Meccanica SCOTTI CNC Table, Руководство по программированию

Страница: 6 / 28

6
For Example :
* If you want to carry out a rotation of 90 degrees and 12 hundredths degrees .
TYPE :
( 9 ) ( 0 ) ( 1 ) ( 2 ) = NUMERICAL VALUE
( ANG ) = FUNCTION (Forward degrees) - (2ND)(ANG) =Backword
degrees
(
Î
) = EXECUTION
* If you want return to zero piece or reach an angle in absolute .
TYPE :
( 0 ) = NUMERICAL VALUE
( 2ND ) ( 7 ) = Function ( Return to Zero Piece )
(
Î
) = EXECUTION
* If you want to carry out the reset of table axis (Mechanical Zero) .
TYPE :
( 1 ) = NUMERICAL VALUE
( 2ND ) ( 8 ) = RESET FUNCTION
(
Î
) = EXECUTION
* If you want to set "
Zero Piece " position .
TYPE :
( 0 ) = NUMERICAL VALUE
( 2ND ) ( 8 ) = RETURN TO ZERO
(
Î
) = EXECUTION
* If you want to carry out a rotation like 1/127 of 360 degrees .
TYPE :
( 1 ) ( 2 ) ( 7 ) = NUMERICAL VALUE
( 2ND ) ( 3 ) = Function ( FORWARD DEGREES )
(
Î
) = EXECUTION
***** N. B. *****
The control will hold the current position, while the Table is turning, untill you turn off the power, in
this case you must reset the Table.
You can also loose teoric Zero position if you stop the machine by stop key (-) an indexed rotation
(degrees) (indexing) (return to zero) forward and backwards.