mecanair THERMO SPHERE PH-9100WTXN Скачать руководство пользователя страница 3

 

IMPORTANT INSTRUCTIONS 

 
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER 

 

NOTE: There may be a trace of smoke or odor when unit is first operated.  Don’t be alarmed. 
This indicates that a drop of oil fell on the heating coil during the manufacturing process. It 
will quickly evaporate and should not re-occur. 
Make sure that the room in which the appliance is located is well ventilated during this 
operation. It is normal for the appliance to emit small cracking sounds when you turn it on for 
the first time. Do not be alarmed. 

 

WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE 
FOLLOWED TO REDUCE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS OR 
PROPERTY, INCLUDING THE FOLLOWING: 
  
1)  Read all instructions before using this heater.  
2)  This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep 
combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least  
3’ (0.9 m) from the front of the heater and keep them away from the sides and rear.  
3)  Extreme caution is necessary when any heater is used by or near children or invalids and 
whenever the heater is left operating and unattended.  
4)  Always switch off the heater when not in use.  
5)  Do not operate any heater after the heater malfunctions, has been dropped or damaged in any 
manner. Disconnect power at service panel and have heater inspected by a reputable electrician 
before reusing.  
6)  Do not use outdoors.  
7)  To disconnect heater, turn off power to heater circuit at main disconnect panel. 
8)  Do not install less than 6 feet (1.8 m) high from the floor and closer than 1 foot (0.3 m) to any 
adjacent vertical surfaces or walls. Keep at least 4.5 inches (11.5 cm) from the back wall (with or 
without using the wall hanging mounting bracket). 
9) Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause 
an electric shock or fire, or damage the heater.  
10) To prevent a possible fire, do not block air intakes or exhaust in any manner.  
11) A heater has hot and arcing or sparking parts inside. To reduce the risk of fire, do not use it in 
areas where gasoline, paint, or flammable vapors and liquids are used or stored.  
12) Use this heater only as described in this manual. Any other use not recommended by the 
manufacturer may cause fire, electric shock, or injury to persons.  
13) This product must be installed by a certified electrician, in accordance with local codes.  
14) For supply cables, use 6 AWG (13.3 mm

2

) copper wires . 

15) WARNING – RISK OF FIRE, DO NOT USE AS A RESIDENTIAL OR HOUSEHOLD HEATER. 

 

CAUTION – High temperature, risk of fire, keep electrical cords, drapery, furnishings, and 
other combustibles at least 3 feet (0.9 m) from the front of the heater and away from the side 
and rear.

 

 

SAVE THESE INSTRUCTIONS 

 
 

WARNING – RISK OF FIRE, DO NOT USE AS A RESIDENTIAL OR HOUSEHOLD HEATER. 

 

 
 
 
 

Содержание THERMO SPHERE PH-9100WTXN











Отзывы: