06
07
MECA EVO 1 SQ Setup Guide | Shifter assembly
MECA EVO 1 SQ Setup Guide | Shifter assembly
Adjusting the
spring settings
and
shifter handle
replacement
Springs can be adjusted using special key included in package.
If you wish to change your shifter handle, you can do so. The handle is mounted on 30mm long M10 thread.
Adjusting the
shift click
feeling
You can adjust shifter click toughnes using the flat screw driver and 19mm wrench.
Don't tighten the sprung
ball screw fully, it will block
the mechanism
Use flat screwdriver
30,00
M10
Included in package
Use 19mm wrench
