background image

Page 18

Mast Seres - Servce & Parts Manual

May 2021

Secton 10 - Mantenance

Pre-delivery Preparation Report

Fundamentals

It is the responsibility of the dealer to perform the Pre-delivery Preparation.

The Pre-delivery Preparation is performed prior to each delivery. The inspection is designed to 
discover if anything is apparently wrong with a machine before it is put into service.

A damaged or modified machine must never be used. If damage or any variation from factory 
delivered condition is discovered, the machine must be tagged and removed from service.

Repairs to the machine may only be made by a qualified service technician, according to the 
manufacturer’s specifications.

Scheduled maintenance inspections shall be performed by qualified service technicians, according to 
the manufacturer’s specifications and the requirements listed in this manual.

Instructions

Use the operator’s manual on your machine.
The Pre-delivery Preparation consists of completing the Pre-operation Inspection, the 
Maintenance items and the Function Tests.
Use this form to record the results. Place a check in the appropriate box after each part is 
completed. Follow the instructions in the operator’s manual.
If any inspection receives an N, remove the machine from service, repair and re-inspect it. After 
repair, place a check in the R box.

Legend

Pre-Delivery Preparation

Y

N

R

Y = Yes, Completed

Pre-operation Inspection Completed

N = No, Unable To Complete

Maintenance Items Completed

R = Repaired

Function Tests Completed


Содержание Mast Series





















































































































Отзывы: