Mec Empower Broadband Calix GigaCenter, Быстрый старт, Страница: 19 / 31

18
10. Extending wireless coverage using the Calix 804Mesh Dual Wi-Fi device
a. Connect the power supply and plug in the Calix 804Mesh Dual Wi-Fi device in the part
of the building you desire to extend wi-fi service. Once the power light and two of the
Wi-Fi Backhaul lights are solid green
(see sections “i” and “ii” below), press the “WPS”
button on the back of the 804Mesh Dual Wi-Fi device until the four “WiFi Backhaul”
lights are flashing green.
i. The optimum distance for the Calix 804E away from the Calix 844E or 844G will
be indicated by two green lights only in the “WiFi Backhaul” lights. More lights
than two indicate that the Calix 804Mesh Dual Wi-Fi device is too close to the
Caliz 844E or 844G. Less than two lights in the WiFi Backhaul lights indicate
that the Calix 804Mesh Dual Wi-Fi device is too far away from the Calix 844E
or 844G.
ii. Optimum distance from the Calix 844E or 844G to the Calix 804Mesh Dual Wi-
Fi device is affected by the number and type of walls and other physical
obstacles between the two devices.
b. After pressing the “WPS” button on the back of the 8 04Mesh Dual Wi-Fi device, go to
the operating ONT and ensure the green light adjacent to the “WPS” button is solid
green. Press the “WPS” button on the ONT until the light flashes green.
c. Wait until the WPS light is solid green.
d. Go to the Calix 804 Mesh Dual Wi-
Fi device. Examine the “WiFi Backhaul” lights to
ensure that the conditions explained is sections a.i and a.ii above are met. Adjust the
location of the Calix 804Mesh Dual Wi-Fi
if the “WiFi Backhaul” lights indicate that you
are too close or too far from the Calix 844E or 844G.