Mec 500E ATA, Руководство пользователя, Страница: 3 / 19

Page 3 Version 2
Step 3
– Your machine is factory set to White Flyer clays. Sizes may vary based on manufacturer, so
you may need to check the height / clearance of the knife-edges by placing a clay in the carousel.
Rotate the carousel so that the clay starts to pass underneath the inner and outer knife separator
blades. The clay must pass freely under the knife separator blades without binding but with the
minimum of clearance. Adjust if necessary with 7/16” open ended wrench. You are looking for a gap
about the thickness of a business card, between the horizontal shoulder of the clay and the underside
of the knife edges. Photos below show adjustment with carousel fitted, but you can remove the
carousel to make adjustment easier if preferred.
** ALL MEC MACHINES ARE SET UP USING THE WHITE FLYER STANDARD
TARGETS. ADJUSTMENTS NEED TO BE MADE WHEN USING OTHER BRANDS
OR STYLES OF TARGETS**