October 2008
"2033ES / 2633ES" Service & Parts Manual - ANSI Specifications
Page 2-6
Battery Charging
Main Electrical Power
The use of an improper extension cord could result in a risk of fire
or electric shock.
The use of long extension cords with the charger should be minimized. If an extension cord is
used, ensure that it has three conductors with a ground and that the wire size and length meet
your electrical code for the voltages and currents of the Electrical Specifications table. Locate all
cords so that they will not be driven over, stepped on, tripped over, or otherwise subjected to
damage or stress.
Connect the power supply cord to a properly grounded 100 Volt / 50 or 60 Hz, 115 Volt / 60 Hz, or
230 Volt / 50 or 60 Hz socket. This charger automatically senses and adjusts to the AC input
voltage range.
The charger will start automatically within four to six seconds. The charger will start even with
severely discharged batteries (down to 1 volt terminal voltage). Once charging starts, the LEDs
indicate the charging progress as described in the following Charging State table. If all 3 LEDs
blink together there is a problem. Take proper action according to the trouble shooting guide
found in
Section 4: Troubleshooting. The charger goes into an equalizing charge mode after the
batteries are charged and all 3 LEDs are ON. The charger will continue to charge at a low cur-
rent then shut-off automatically when complete.
Charging State & LED Display
50 %
75 %
100 %
Charging State
LED
0 to 50 % charged
Blinking
OFF
OFF
50 % to 75 % charged
ON
Blinking
OFF
75 % to 100 % charged
ON
ON
Blinking
100 % charged
ON
ON
ON
Abnormal Cycle
OFF
OFF
Blinking
Содержание 2033ES
