Page 6 Version 3
Step 15
– The pull cord or optional radio release can now be connected to the
machine.
Step 16
– The machine can now ready for use by pressing the
ARM/OFF/DISARM toggle switch, down to the
“ARM” position.
Step 17
– With the machine pointed in a safe direction, press the fire button on
the pull cord or radio release. This will cause the machine to fire a clay and then
reset to the firing position. Pressing the fire button again will do the same as
above. Pressing and holding the fire button will continuously fire clays without
delay.
Your machine is now operating smoothly and ready for use. It is critical that you
never load or make adjustment to the machine unless it is disarmed, and the
battery disconnected. While in storage, the machine must be left in the disarmed
state and the battery disconnected. Any spring tension does not need to be
released.
