ATS 420 ATS CONTROLLER USER MANUAL
16
Under records mode, pressing this key to move the digit.
Down
Under display mode, parts of the page can move down.
Under edition mode, pressing this key to move the digit
or decrease the numbers.
Under records mode, pressing this key to move the digit.
OK
SET
Eliminate alarm
Confirm the change under edition mode.
Shift right under edition mode.
Page exited under records checking mode.
In standby state, press for 3 seconds to enter the
parameter setting mode.
In the alarm page, press this key to eliminate the fault
alarm.
LED Indicators description
Indicator Type
Description
Alarm
Lights red when a fault alarm occurs.
Warning
Lights yellow when a warning alert occurs.
Running
Green during normal operation.
S1 Close Status
It is light on when S1 close input is activated.
S2 Close Status
It is light on when S2 close input is activated.
Manual/Test Mode
It is light on when the module is in Manual mode.
It is light on when the module is in Test mode.
Auto Mode
It is light on when the module is in Auto mode.
Alarm records checking
ATS 420 controller can save 14 group of alarm records which contains the alarm
record data includes detailed data such as alarm time,prompt status information, etc.
How to check the alarm records:
1. Enter alarm record page:
1) Press the
key for 3 seconds to view the alarm record.
2) Enter the setting mode, select the alarm record and press
key to enter
2. Press
to turn upper digit and press
to turn lower digit in order to choose
the record you need. Press
to confirm the record and come into history records
checking page.
3. Press
to turn lower records under records checking page. Press
to turn
upper records and press
to revert back to alarm history records page.
4. Exit from records page: In the history records page and checking page, press
to exit.
Generator set start/stop operation
Test machine
In the main screen, Press the
for 3 seconds to enter into manual start operation
interface.
