Measurement Computing USB-1808X Скачать руководство пользователя

Страница: 2 / 29

HM USB-1808X.docx

Trademark and Copyright Information

Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement Computing logo are

either trademarks or registered trademarks of Measurement Computing Corporation. Refer to the Copyrights &

Trademarks section on

mccdaq.com/legal

for more information about Measurement Computing trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective

companies.
© 2019 Measurement Computing Corporation. All rights reserved. No part of this publication may be

reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, by

photocopying, recording, or otherwise without the prior written permission of Measurement Computing

Corporation.

Notice

Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for

use in life support systems and/or devices without prior written consent from Measurement Computing

Corporation. Life support devices/systems are devices or systems that, a) are intended for surgical implantation

into the body, or b) support or sustain life and whose failure to perform can be reasonably expected to result in

injury. Measurement Computing Corporation products are not designed with the components required, and are

not subject to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of

people.

Содержание USB-1808X






























Результаты поиска

Содержание USB-1808X

Отзывы:

Похожие инструкции для USB-1808X

Бренды по названию

Популярные бренды

Measurement Computing USB-1808X, Руководство пользователя

Результаты поиска

Содержание USB-1808X

Отзывы:

Похожие инструкции для USB-1808X

Бренды по названию

Популярные бренды