Measurement Computing USB-1096HFS, Руководство пользователя

Страница: 25 / 32

4-1
Chapter 4
Specifications
Typical for 25 °C unless otherwise specified.
Specifications in
italic text are guaranteed by design.
Digital input / output
Table 4-1. Digital I/O specifications
Output 74ABT244A
Input 74ACT373
Configuration
8 banks of 8, 8 banks of 4, programmable by bank as input or output
Number of I/O 96
Output high 2.0 volts min @ -24 mA
Output low 0.5 volts max @ 64 mA
Input high 2.0 volts min, 5.5 volts max
Input low 0.8 volts max, -0.5 volts absolute min
Source current Maximum = 24 mA per output
Sink current Maximum = 64 mA per output
Power up / reset state Input mode (10 K ohm pulled-up by default)
Power
Table 4-2. Power specifications
Parameter Conditions Specification
USB +5 V input voltage range 4.75V min. to 5.25V max.
USB +5 V supply current All modes of operation <100 mA
External power input
6.0 VDC to 12.5 VDC (9 VDC power
supply provided)
External power supply (included) MCC p/n CB-PWR-9V3A 9 V ± 10% @ 3 A
6.0 V > Vext or Vext > 12.5 V PWR LED = Off (power fault) Voltage supervisor limits - PWR LED
6.0 V < Vext < 12.5 V PWR LED = On
Power supply current 2.6 A max
User 5 V output voltage range Available at 5 V screw terminals
(25, 77 and 103) 4.0 V min., 5.25 V max.
User 5 V output current available Total from all 5 V screw
terminals 50 mA max
External power output
Table 4-3. External power output specifications
Parameter Conditions Specification
External power output - current range Note 1 4.0 A max. @ 25 °C
External power output - voltage range The input voltage minus the output voltage at the
daisy chain output 0.5 V max
Compatible cable(s) for daisy chain C-MAPWR-x X = 2 , 3, or 6 feet