Measurement Computing USB 1024ls, Часто задаваемые вопросы, Страница: 7 / 11

Figure 15:
Your USB 1024ls will be listed in the device 'tree' under the 'Universal Serial Bus' section. You may also see a
listing for a 'Demo-Board'.
Figure 16:
If it exists, remove the 'Demo-Board' device by highlighting its listing and clicking the Remove Board icon (as
shown in Figure 16). You will then be prompted with a confirmation message stating
'Remove Board DEMO-
BOARD' . Click OK to finalize the deletion of the Demo-Board.
Figure 17:
Take a careful note of the 'Board#' (Board Number) given to your USB 1024ls, as this information will be
needed when configuring Simian and/or WaveCart.
Figure 18:
To test that your computer is communicating with your USB 1024ls, or physically identify your device (IE: if
you have 2 USB 1024ls' installed on your computer), highlight the USB 1024ls in the device 'tree', then click the
Configure button (as shown in Figure 18). Click the Flash LED button to flash the led on your device. With
multiple devices, only the device you highlighted will flash its LED.
Now that your USB 1024ls is installed and configured, you can proceed to the next section pertaining to yoru
situation: Configuring Triggers in Simian, or Configuring Closures* in Simian, Configuring Triggers in
WaveCart.
Configuring Simian