Measurement Computing BTH-1208LS Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 28

background image

BTH-1208LS User's Guide

Functional Details

13

Power/pairing button

The power/pairing button has different functions depending on the power source of the device.

The term

pairing

refers to one function of the button – to put the device in

pairing mode

so it can establish an

association between the Bluetooth radio on the host device and the BTH-1208LS radio.

Button functions are listed in the table below.

Power/pairing button functions

Power Status

Button Functions

Battery powered



To power on the device, press and hold the button for 3 seconds. To enter pairing
mode, hold the button for an additional 2 seconds.



To remove the device from pairing mode, press and hold the button again for 2
seconds.



To power off the device when not in pairing mode, press and hold the button for 2
seconds

Powered by USB charger/USB
power supply



To put the device in pairing mode when it is powered on, press and hold button for 2
seconds.



To remove the device from pairing mode, press and hold the button again for
2 seconds.

Powered by USB host port or
hub

The power/pairing button is disabled.

LEDs

The Power LED indicates the power status of the device. The Status LED indicates the communication status of
the device.

LEDs cannot be disabled. LED states are listed in the tables below.

Power and Status LED behavior

Power LED

Indication

Steady green

The device is powered by USB and the batteries are sufficiently charged or not installed.

Blinks
continuously



If the device is connected to USB port/host, then the batteries are recharging (only if rechargeable
batteries are installed).



If the device is not connected to USB port, then it is powered by batteries.



If the Power LED is blinking alternately with the Status LED, then the device is in pairing mode.

Off

Device is off.

Status LED

Indication

Steady green

Bluetooth or USB connection established

Blinks
continuously



Communication with host computer occurring over Bluetooth or USB connection.



If the Status LED is blinking alternatively with the Power LED, then device is in pairing mode.

Off

A Bluetooth or USB connection is not established

Distributed By MicroDAQ, LLC 603-746-5524 www.MicroDAQ.com

«
...
11
12
13
14
15
...
»

Содержание BTH-1208LS





























Отзывы:

Нет отзывов

Похожие инструкции для BTH-1208LS

Бренд: Major tech Страницы: 8

Бренд: Waltron Страницы: 25

Бренд: Kane Страницы: 19

Бренд: Kawai Страницы: 19

Бренд: Calculated Industries Страницы: 64

Бренд: Cannon Страницы: 64

Бренд: Cannon Страницы: 73

Бренд: Omicron Lab Страницы: 33

Бренд: Omicron Lab Страницы: 21

Бренд: Omicron Lab Страницы: 22

Бренд: Vectornav Страницы: 114

CP-4900 Micro-GC

Бренд: Varian Страницы: 13

Бренд: Valcom Страницы: 1

Бренд: lanry Страницы: 2

Бренд: lanry Страницы: 29

Бренд: M-Sure Страницы: 2

Бренд: LaserLiner Страницы: 52

Бренд: Veris Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды