DIMMING OPERATION
XLG-25
◎
Applying additive 0 ~ 10VDC
◎
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
◎
Applying additive resistance:
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%<
I
out<8%.
2. The output current could drop down to 0% when dimming input is about 0k
Ω
or 0Vdc, or 10V PWM signal with 0% duty cycle.
Vo+
Vo-
DIM+
DIM-
+
+
+
-
-
-
“
DO NOT connect "DIM- to Vo-"
Additive Voltage
Vo+
Vo-
DIM+
DIM-
+
+
-
-
“
DO NOT connect "DIM- to Vo-"
Additive PWM signal
Vo+
Vo-
DIM+
DIM-
+
+
-
-
“
DO NOT connect "DIM- to Vo-"
Additive Resistance
0V 1V
2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
88%
100%
O
u
tp
u
t c
u
rr
e
n
t (
%
)
0% 10% 20% 30% 40% 50% 60% 70% 80% 88% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
88%
100%
O
u
tp
u
t c
u
rr
e
n
t (
%
)
10%
0%
20%
30%
40%
50%
60%
70%
80%
88%
100%
O
u
tp
u
t c
u
rr
e
n
t (
%
)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
XLG-25
series
25W Constant Power Mode LED Driver
※
3 in 1 dimming function (for AB-Type)
‧
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
‧
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
‧
Dimming source current from power supply: 100 A (typ.)
μ
Short
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for
synchronized
dimming
operation
)
Dimming input: Additive resistance
DIM-(Pink)
DIM+(
)
Purple
File Name:XLG-25-SPEC 2022-08-08
AC/L(Brown)
AC/N(Blue)
PE (Green/Yellow)
V-(Black)
V+(Red)
