Mean Well PB-600, Инструкция по эксплуатации

Страница: 6 / 6

5
10.Series and parallel connection of batteries
1.Batteries in series
Voltage can be doubled when 2 batteries are connected in series. However, the capacity (AH) will remain the same.
For example, 2 x 12V 100AH batteries connected in series = 24V 100AH.
2.Batteries in parallel When 2 batteries are connected in parallel, voltage remains the same and the capacity(AH)doubles.
For example, 2 x 12V 100AH batteries connected in parallel = 12V 200AH.
Note : The proper detachable power supply cord type should be selected as table below and shall be minimum No. 18 AWG/3C,
provided with a molded on, grounding type attachment plug with 15A, 125V (NEMA 5-15P) or 15A, 250V (NEMA 6-15P)
configuration and terminated in molded-on connector which mates with the appliance inlet, minimum 1.8m and maximum length
as noted in table below.
+
+
+
+
Battery
Battery
Battery
Battery
-
-
-
-
9.Suggested the number of cells
12.Failure correction notes
11.Suggested the power cord
Intended use of power unit
A. Desk, countertop, rack
mounted, or the like
B. Floor mounted, stationary,
or the like
10 (3)
Not specified
Flexible cord type Maximum length, feet(m)
SP-2, SPE-2, SPT-2,SV,
SP-3, SPT-3, ST, STO,
SJ, SJE, SJO, SJT, SJTO
SVE,SVT
S, SE, SO,
2. If you're unsure about max allowable charging current of the battery, please refer to the battery's technical specification
or consult its manufacturer.
Model
PB-600-12 100AH 1~4
PB-600-24
PB-600-48
80AH 1~3
46AH 1~2
Battery capacity Number
If you are not able to clear the failure condition, please contact Mean Well or any of our distributors for repair service.
Status
Unable to
charge the
battery
LED indicator
does not turn
Green after a
long charging
period
Possible Reasons
ON/OFF switch in the OFF position Switch to the ON position
Reconnect using correct
polarity
Use battery with the
correct voltage
Make sure input source
is between 90~264VAC
Replace with a new battery
Replace with suitable wire
gauge
Battery reverse polarity
Battery with higher voltage is connected
Input AC voltage is too low
Battery exceed lifespan or damaged
Output cables are too thin
Ways to Eliminate
WARNING : This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.