Mean Well PB-1000-12, Инструкция по эксплуатации

Страница: 3 / 8

2
1.The charger should be turned OFF prior to battery connection. Suitable wire gauge should be chosen based on rated charging
current of the PB-1000 unit. Double check battery polarity before making the battery connection. Positive terminal of the charger
must be connected to "+" of the battery and negative terminal to "-" of the battery. Also, make sure the positive and negative
terminals of the charger are not accidentally shorted together.
2.After connecting the output cables, flick the ON/OFF (0/-) switch to the ON (-) position. The indicator light on the switch will turn ON.
Assembly Guidelines:
1.Designed for charging lead acid battery.
2.Must be installed in a dry and well ventilated area. It should not be exposed to rain or snow.
3.The cables between charger and battery should be kept as short as possible to prevent excessive line drop. Too much line drop will
lead to longer charging period.
4.Please make sure charging voltage and current meets battery specification.
5.Refrain from connecting new and old batteries in series.
6.PB-1000 should be in the OFF mode before making battery connection or disconnection.
7.Three years warranty is provided under normal operating conditions. Failure resulting from improper operation will result in
cancellation of warranty.
Notes on Operation:
AC INLET
Battery B
Positive Battery A
Positive
WARNING : Please check
battery polarity
before connection
Common
Negative
Fan
Ventilation
Hole
Figure 2.1 Front Panel
Figure 2.2 Back Panel
LED
Indicator
Function
Connector
2/8 stage
selection switch
ON/OFF SWITCH
ON
AC INPUT
OFF
A
{
B
A B
1 2
3 4
5 6
7 8
9 10
8 Stage 2 Stage
+
+
Battery A
Battery B
-
-
2.Front and back panel
1 2
3 4
5 6
7 8
9 10