Mean Well DRS Series, Руководство пользователя, Страница: 24 / 35

41
AC OK high line point
setting
AC_OK_HL_SET
2
0x00E3 R/W
Buffering time setting
Backup power counting
(Not support)
TIME_BUFFERING 2
2
0x00E4
0x00E5 BACKUP
R/W
R/W
0x00E6 RUN TIME
4
Running time
(Not support)
R/W
Charging or discharging
current of battery
(format:
value, F=0.01)
Temperature of battery
(format:
value, F=0.1)
0x00D4 READ_IBAT R 2
0x00D5 READ_BAT_TEMPERATURE R 2
Charge cycles
(Not support)
Battery capacity
(Not support)
AC OK low line point
setting
AC fail low line point
setting
AC fail high line point
setting
CHARGE CYCLES R/W
2
R/W
2
AC_Fail_LL_SET R/W 2
AC_Fail_HL_SET R/W 2
AC_OK_LL_SET R/W 2
0x00D6
0x00D7 AH CHARGED
0x00E0
0x00E1
0x00E2
Note: The conversion of setting and reading values is defined as following:
Actual value= Communication reading value × F actor (F value).
A m o n g t h e m Fa c t o r n e e d s t o r e f e r t o t h e d e f i n i t i o n o f
SCALING_FACTOR in each model list.
EX: Vo_real(actual DC voltage)= READ_VOUT × F actor.
I f t h e Fa c to r of R E A D _ VO U T of a c e r t a i n m o d e l i s 0 . 0 1 , t h e
communication reading value is 0x0960(hexadecimal)→2400(decimal),
then Vo_real = 2400 × 0 .01 = 24.00V.
5
42
5
Bit1 Bit0
OTP
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2
Low byte OP_OFF AC_FAIL SHORT OLP OVP
Low byte:
Bit 0 FAN_FAIL： Fan abnormal state (Not support)
0＝ Normal state
1= Abnormal state
Bit 1 OTP： Over temperature protection
0＝ Normal internal temperature
1＝ Abnormal internal temperature
Bit 2 OVP： Output over-voltage protection
0＝ Normal output voltage
1＝ Abnormal output
Bit 3 OLP： Output over current protection
0＝ Normal output current
1＝ Abnormal output current
Bit 4 SHORT： Short circuit protection
0＝ Shorted circuit does not exist
1＝ Shorted circuit protected
Bit 5 AC_FAIL： AC abnormal flag
0＝ Normal AC range
1＝ Abnormal AC range
Bit 6 OP_OFF： DC status
0＝ DC turned on
1＝ DC turned off
Bit 7 HI_TEMP： High ambient temperature protection
0＝ Normal ambient temperature
1＝ Abnormal ambient temperature
High byte:
Bit 0:7 Reserved： Currently not in use, retain (default is 0)
Note: Unsupported settings displays with “0”
FAN_FAIL
High byte Reserved Reserved Reserved Reserved Reserved Reserved Reserved
◎
FAULT_STATUS 0x0040 ( ) ：