6
SAFETY PRECAUTIONS
This safety alert symbol is used to call attention to a message intended to provide a reasonable degree of
PERSONAL
SAFETY
for operators and other persons during the normal operation and servicing of this equipment.
DANGER (red color)
–
denotes immediate hazards which WILL result in severe personal injury or death.
WARNING (yellow color)
–
denotes a hazard or unsafe practice which COULD result in severe personal injury or
death. This manual uses two other words to highlight information.
IMPORTANT
(blue color)
calls attention to
special mechanical information and
NOTE:
emphasizes general information worthy of special attention. All
operators and mechanics should read this manual and be instructed about safe operating and maintenance
procedures. If the operators or mechanics cannot read and understand English, it is the owner’s responsibility to
explain this material to them.
However, improper use or maintenance by the operator or owner can result in injury.
To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety
alert
symbol, which means DANGER or WARNING -
“perso
nal
safety instructions.” Failure to comply with the
instructions
may result in personal injury or death. Incorrect usage of this machine may result in severe
injury.
Personnel operating and maintaining it should be trained in the proper use and should read the manuals
completely and thoroughly before attempting to set-up, operate, adjust, or service this machine.
It is the
owner’s responsibility
to make certain that the operators and mechanics read and understand this manual
and all decals before operating this machine. It is also the
owner’s responsibility
to make certain that the operators
and mechanics are qualified and physically able individuals, properly trained in the operation of this equipment. All
operators and mechanics must become familiar with the safe operation of the equipment, operator controls and
safety signs. Never let children or untrained people operate or service the equipment. Local regulations may restrict
the age of the operator. The owner/user can prevent and is responsible for accidents or injuries occurring to
themselves, other people or property. The owner should also ensure that the operator/mechanic know that they are
responsible for their own safety as well as the safety of other persons within the vicinity.
Remember,
the operator
is responsible for accidents or hazards occurring to other people or their property.
Safety and Instruction Decals
Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These
decals should not be removed or obliterated. Replace them if they become non-readable.
The following illustrations show the various decals that are located on the machine. A brief explanation, for those
requiring one, is shown to help the operator understand the meanings of these decals.
DECAL INFORMATION
•
Safety decals must be visible and clear from foreign matter and debris.
•
Decals that have been worn off or have become illegible must be replaced.
•
When replacement components are installed be sure that current safety signs are affixed to the replaced
components.
•
If an attachment or accessory has been installed, make sure current safety signs are visible.
•
Replacement decals can be ordered from Mean Green’s main office
.
•
Expose the adhesive surface by peeling off the back of the decal and placing it onto a clean dry surface.
DECALS
Familiarity of these decals will help in the safe operation of your mower.
