INSTALLATION
Communications between the main unit (receiver) and the remote sensor (transmitter) is
wireless. This allows you to greater flexibility in choosing the location of remote sensor. The
remote transmits data up to 164 feet (50 meters) over an open, unobstructed area.
The remote sensor can be located either indoors or outdoors, allowing you chose where your
data is obtained.
NOTE:
• It is critical to power the remote sensor
BEFORE
setting up the main unit.
• It is critical to power up and
test
communication between the remote sensor and the main unit
BEFORE
permanently mounting outside.
BEFORE YOU BEGIN
• We recommend using
alkaline batteries
for the remote sensor and the main unit. If outdoor
temperatures regularly fall
below 32°F
(0°C), we recommend using
lithium
batteries.
• Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power
requirements.)
•
ALWAYS
insert batteries into the
remote
sensor
before
the main unit.
• Insert batteries before first use, matching the polarity in the battery compartment.
• During initial set up, place the remote sensor close to the main unit.
• After reception is established (remote readings will be appeared on the main unit’s display),
position the remote sensor and the main unit within the effective transmission range of up to
164 feet (50 meters).
• The main unit must be placed indoors.
NOTE:
• Avoid pressing any buttons on the main unit before the remote readings are displayed.
• Transmission or reception range may be affected by trees, metal structures, and electronic
appliances, surrounding building materials and how the main unit and transmitter are
positioned.
• Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such
as doors, walls and furniture.
• Though the remote sensors are weather-resistant, they should be placed away from direct
sunlight, rain or snow. The optimal location for the remote sensor outdoors is under the eaves
on the north side of the building.
3
