Meade mySKY, Инструкция по эксплуатации, Страница: 9 / 12

to your telescope. See the instructions that came in the
cable package for details.
Requirements:
Microsoft
®
Windows
®
98se / Me / 2000 / XP/ Vista
™
.
Updating mySKY software:
1. Install Autostar
®
Suite Astronomer’s Edition software
on your computer. Insert the Autostar Suite DVD into
your DVD drive. The installation software should start
automatically.
Follow the on-screen instructions.
2. Power off mySKY.
3. Remove the SD memory card by moving the rubber
cover on the side of the mySKY and pushing in on the
edge of the SD card. The card will pop-out.
4. Insert into a PC SD card reader. If your PC does not
have a built-in SD card reader, you will need to obtain
a stand-alone reader (inexpensive and available at most
local PC and electronic stores).
Connect the SD card
reader to a USB port on your computer and insert the
SD card into the card reader.
5. Find the “Update mySKY” icon that was installed on
your computer desktop and double click it. In the
Updater window, click on the drive letter that contains
your SD card. Now click on the “Update mySKY SD
card” button. The update process will start, the “Update
mySKY SD card” button will be grayed out, and the
progress bar will begin to fill in. Wait until the progress
bar is completely filled in and the “Update mySKY SD
card” button is no longer grayed out before you remove
the SD card. Do not remove the SD card, close the
updater program, or turn off your computer while the SD
card is being updated. In the unlikely event of a computer
crash, start this step over.
6. After the software has been updated, reinsert the
SD memory card back into mySKY.
7. Turn on mySKY. That’s it! You now have updated software.
How to Reset mySKY if It Freezes Up
First, press the ON/OFF button.
If that does not work, open the battery compartment and
remove one battery for 15 seconds. Replace the battery.
Press the ON/OFF button again to restart mySKY.
8