manualshive.com logo in svg

Meade LX-90, Инструкция по эксплуатации, Страница: 28 / 60

Поделиться
Скачать
Meade LX-90 Скачать руководство пользователя страница 28

Time Zone

Shift

Atlantic

-4 Hours

Eastern

-5 Hours

Central

-6 Hours

Mountain

-7 Hours

Pacific

-8 Hours

Hawaii

-10 Hours

Table 1:

Time Zone Shift.

28

J

Reverse L/R:

Reverses the functions of the Left and Right Arrow keys (

i.e.

, the Right key

moves the telescope to the left)

.

J

Reverse UP/DOWN:

Reverses the functions of the Up and Down Arrow keys (

i.e.

, the Up

key moves the telescope down)

.

J

Calibrate Sensors:

This menu allows you to improve your telescope's pointing accuracy

to alignment stars. It calibrates to correct slight mechanical misalignment due to transport,
vibration, or aging. It is recommended that calibration be performed after the LNT Module
batteries are changed (see page 54 for more information).

When this menu is selected, the telescope slews to Polaris. AutoStar then prompts you to
center Polaris and to press ENTER. AutoStar uses the position of Polaris to fine tune the
position of North and also for detecting level.

J

Quiet Slew

: Sets the maximum slew rate to 1.5° for quieter operation.

J

Max Elevation

: Allows you to enter a value in degrees that sets a limit as to how far the

optical tube can swing upward during a programmed slew. (Note that it does not prevent
you from performing a manual slew past this limit.) This is 
useful when you have a camera or other peripheral attached to the telescope—you can
prevent it from striking the telescope base.

J

Min AOS (Acquisition of Signal):

Allows you enter a value in degrees. This value 

represents the altitude at which your telescope begins to slew when 
acquiring a satellite track. This is useful when you are observing satellites, but a tall tree or
building is obstructing the telescope. For example, you might begin to track the satellite at
15° altitude, instead of 5°. See “OBSERVING SATELLITES,” page 32, for more information
about satellites.

J

Calibrate Motor

: If the telescope motors appear to have a problem, use this option to

retest the motors before performing a Reset. This option is also used if an AutoStar unit is
moved between telescopes, to match AutoStar to the new telescope. To calibrate the
motors, select this option and press ENTER.

J

Smart Drive

: Allows you to perform periodic error correction (PEC) on the R.A. worm gear

and can only be used with polar mounted telescopes.

Must be 

performed with a high powered reticle (

eg. 9mm

). PEC Training for the the LX90 

telescopes will take about 8 minutes.

J

High Precision:

If High Precision is turned on, when looking for a faint celestial object (

i.e.

,

a nebula or galaxy), AutoStar first slews to a nearby bright star and displays "ENTER to
Sync." Center the star in the eyepiece, then press ENTER. At that point the telescope has
a high precision alignment to that part of the sky and it then slews to the object that was
originally requested.

Targets 

switches between Astronomical targets and Terrestrial targets. If "Astronomical" is

selected, the telescope tracking motor is activated and any object you observe will remain 
centered in the eyepiece. If "Terrestrial" is selected, the tracking motor is turned off. To learn how
to track an object automatically, see page 18.

Site

provides access to several options including:

J

Select

: Displays the currently selected observing site. Use the Scroll keys to cycle through

all available sites (see "Add" below). Press ENTER when the site you wish to select 
displays. Use this option when you move to a different geographic location.

J

Add

: Allows you to add new observing sites to the database (up to six sites may be stored).

Scroll through the list of Countries/States. Press ENTER when the site you wish to add 
displays. Then choose the desired city in the same manner.

J

Delete

: Deletes a stored site from the database.

J

Edit

: Edits a selected site, including: the name, latitude, longitude, and time zone. Time

Zone refers to the Greenwich Mean Time (GMT) time zone shift. Users West of Greenwich,
England use “-” hours, East of Greenwich use “+” hours. For the United States, look up the
time zone shift in table at left.

 

Содержание LX-90





























































Отзывы:

Нет отзывов