background image

Looking at or near the 

Sun

will cause 

irreversable

damage to your eye. Do not point this telescope at or near the

Sun. Do not look through the telescope as it is moving.

20

It is important to understand that menu selections are set in a loop (

Fig. 20

). This means that

pressing the Scroll Down key (

7, Fig. 2

) cycles down through all the available options within a

given category, then returns to the first option. The Scroll Up key (

6, Fig. 2

) cycles up through the

options in the opposite order. Note that this capability is a quick way to get to an option that is
near the bottom of the list. The following example demonstrates this capability.

Example:

To navigate to the “Select Item: Setup” menu option when the “Select Item: Object” menu is
displayed: 

1.

Press the Scroll Down key four times or the Scroll Up key once. 

Autostar displays two lines of information. The top line shows the current menu level. The sec-
ond line displays an option which may be selected within that menu level. Some options are
choices that select the next menu level down. The Scroll keys move up and down within the list
of available options, showing one option at a time. 

When the desired option is displayed on the second line, press the ENTER key to choose that
option and move down one menu level. 

Press the MODE key to leave a level (

e.g., the wrong menu option is chosen).

IMPORTANT NOTE:

No matter how many levels into Autostar are traveled, each

press of the MODE key moves up a level, until the top level, "Select Item," is
reached. Once in the Select Item level, press MODE to return to the topmost level,
"Select Item: Object." 

Autostar Navigation Exercise

To demonstrate how the Autostar menu structure works, the following exercise calculates
Sunset time so an evening observing session can be planned. 

NOTE:

To perform an accurate calculation, Autostar must be properly initialized

with the current date, time, and location of the observing site. To enter the current
date, time, and location information of your observing site, see 

INITIALIZING

AUTOSTAR

, page 16, before proceeding with this exercise.

BASIC AUTOSTAR OPERATION

Select Item:
   Setup

Select Item:
   Utilities

Select Item:
   Glossary

Select Item:
   Guided Tour

Select Item:
   Event

                     SETUP MENU

      Quick, easy alignment
    permits all telescope
operations with only
a 2-minute setup.

  UTILITIES MENU

Calculate eyepiece
     magnifications; 
   set timer alerts; 
   create your own
   landmark survey.

                    GLOSSARY

What is an elliptical galaxy? 
        How far away is the Sun?
         Expand your knowledge of 
         astronomy by displaying terms
  and definitions, and other information. 

OBJECT MENU

   Want to see Mars? The Orion nebula? 
       The Andromeda galaxy? Select from 
             over 1400 database objects and press
                 GO TO to move the telescope 
                      automatically to an object.

EVENT MENU

 Display the time of
  past, present, and future
  astronomical events, 
 such as Moon phases 
or meteor showers.

                   GUIDED TOUR

               Autostar escorts you 
         on a tour of tonight's 
     best celestial objects 
at your viewing location.

Select Item:
  Object

MEADE

MEADE

Autostar

The Universe of

Fig. 19: The Autostar Universe: The six primary categories listed in the Select Item menu of Autostar.

 

Object
Event 
Guided Tours
Glossary
Utilities
Setup

Fig. 20: Menus set in a
loop.

Select Item
   Solar System

Select Item
   Object

ENTER

Fig. 21: Autostar levels.

Содержание DS-2000 Series













































Отзывы: