5 [EN]
4. ELECTRICAL CONNECTIONS AND OPERATING CONDITIONS
This air circulator was designed to operate in a 220V-240V / 50Hz electrical installation. Make sure that the electric
sockets are connected to earth and that all safety precautions are taken.
This air circulator can be operated within an ambient temperature range from +5°C to +40°C and with a non-condensing
relative humidity.
5. SPECIFICATIONS
6. TROUBLESHOOTING
7. CLEANING AND STORAGE
Always turn the fan off and unplug it from the socket before cleaning. Clean the fan with a soft, dry cloth, do not allow the
fan to get wet.
When storing the fan use the cable compartment to store the mains cable. Store in its plastic bag or original box to protect
the fan from dust.
Remember the fan can be used in winter to help distribute warm air more effectively in a room.
Model
MeacoFan 1056AC
Operating conditions
+5°C to +40°C
Humidity operating range
Non-condensing
Fan motor type
DC
Maximum air flow
1056 cubic metres per hour
Power supply
220 - 240V / 50Hz
Power consumption
9.5 to 23.5 watts
Oscillation swing angles
60° up and 80° left
Noise level
20 to 60dB
Air circulator Dimensions (mm)
305 x 285 x 403mm
Box dimensions (mm)
335 x 308 x 425
Nett / Gross Weight (Kgs)
3.2 / 3.5Kgs
Trouble
Suggestion
Further action
No power to the fan
No power to the unit
Plug the unit in to the power socket and turn
the socket on.
Fan not turned on
Press the On button.
On button does not work
Check instructions above
If it still does not work then contact Meaco.
Oscillation does not work
Press oscillation button
If the oscillation button does not work then
contact Meaco.
Increased noise level
Fan blades dirty
Clean the fan blade as per the maintenance
section of the manual.
Fan blades or fan motor loose
Tighten the fan blade as per the maintenance
section of the manual.
Fan motor fault
Contact Meaco
Fan speed does not change
Is the fan in ECO mode?
Change mode from ECO to access the fan
speed settings.
