MDT KNX Smart 55 BE-JTA5504.01, Техническое руководство

Страница: 43 / 62

Technical Manual
Blind Push Button Smart 55
BE-JTA5504.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
43
43
4.4.3.10 External function – Basic function: Send value
The following figure shows the available settings:
Figure 28: Settings – Basic function: Send value
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Value

1Byte value

1Byte percent value

absolute position
Blinds/Shutter

Scene number
Setting the data point type for the
value to be sent
Table 29: Settings – Basic function: Send value
Each time the button is pressed, the set value (percentage value, decimal value or scene) is sent. The
adjustable values are 0 - 100% (percentage value), 0 - 255 (value) or 1 - 64 (scene number). With the
setting "absolute position Blinds/Shutter", 2 values (height and slat position) are sent.
Note: Only one value can be displayed as status!
For details on the
button/object description and the lock object , see 4.4.1 Identical parameter
For details about
display , see 4.4.3.1 Identical Settings – Representation on the display
The following table shows the available communication objects:
Number
Name/Object Function Length Usage
15 Button 3 –
Send percent value, Send value,
Send scene, absolute position 1 Byte Sending the value.
DPT depending on the parameter setting
16 Button 3 –
Absolute position of slats 1 Byte Sending the slat position
18 Button 3 –
Status for display 1 Byte Receipt of the status. DPT depends on the
parameter setting.
Not shown when selection "Scene number".
+5 Button 4
Table 30: Communication objects – Basic function: Send value