MDT KNX Smart 55 BE-JTA5504.01 Скачать руководство пользователя | Manualshive

Страница: 34 / 62

background image

Technical Manual
Blind Push Button Smart 55

BE-JTA5504.01

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Phone: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

34

34

4.4.3.1 Identical Settings – Representation on the display

Value/text/symbol for button 3 is shown at the lower left of the display, for button 4, at the lower
right of the display. The following parameters are available for the representation on the display of
buttons 3 and 4.
(here on the example "External function - switch; colour mode "coloured"):

Figure 19: Settings – Representation on the display

The following table shows the available settings:
ETS-Text

Dynamic range

[Default value]

Comment

Display



symbol



fix text



text/value by Status



symbol by Status

Setting for how the function is to be
represented in the display.

Colour of symbols for …

any colour

Any colour can be selected according to
the offer in the drop-down menu.

Only visible if "Display settings" =>
colour mode is set to "coloured".

Symbol for …

any symbol

Symbols can be selected according to the
offer in the drop-down menu.

Text / Text for…

any text

[up to 9 bytes allowed]

Freely adjustable text. ETS text varies
depending on the selected function.

Table 20: Settings – Representation on the display

Symbol:

A fixed symbol is selected for the function. This cannot be changed.

Fix text:

A fixed text is selected for the function. This cannot be changed.

Text/value by Status:

Depending on the selected function and data point type, an adjustable text or

value can be displayed. For "internal functions", the evaluation is internal. For "external functions"
and "shading on/off (global objects)", the respective status object is evaluated. For this, the status of
the actuator must be connected to the "Status for display" object.

Symbol by Status:

Depending on the selected function and data point type, up to three symbols can

be displayed. For "internal functions", the evaluation is internal. For "external functions" and
"shading on/off (global objects)", the respective status object is evaluated. For this, the status of the
actuator must be connected to the "Status for display" object.

Note:

For the function "

Change to settings menu (internal connection)

", a fixed symbol is

unchangeably preset. The parameter "Display" is not available here.

«
...
32
33
34
35
36
...
»

Содержание KNX Smart 55 BE-JTA5504.01































































Отзывы:

Нет отзывов

Похожие инструкции для KNX Smart 55 BE-JTA5504.01

Duette UltraGlide

Бренд: LuxaFlex Страницы: 16

Professional Dual Rise

Бренд: Hallis Hudson Страницы: 2

Remembrance Motorized Shade

Бренд: Hunter Douglas Страницы: 4

Бренд: Electronic Solutions Страницы: 7

Бренд: Graywind Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды