MDT Technologies SCN-WS3HW.01, Техническое руководство

Страница: 5 / 37

Technisches Manual Weather station SCN ‐ WS3HW.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
5
2.5 Functions
The functions of the weather station are divided into general settings and the 6 sensors. Every sensor
must be activated at the general settings for further parameterization.
The following submenus can be shown and parameterized further:

General setting
The general settings are alsways visible. Changes, which are done at this submenu, are valid
for the whole device. The single sensors can be activated or deactivated at this submenu.

Brightness sensor east
The brightness sensor for the east direction can be parameterized at this submenu. Two
thresholds can be activated and parameterized further. Further more an extensive façade
control is available as soon as at least one threshold is active.

Brightness sensor south
The brightness sensor for the south direction with the same functions as described above can
be parameterized at this submenu.

Brightness sensor west
The brightness sensor for the west direction with the same functions as described above can
be parameterized at this submenu.

Dusk sensor
The dusk sensor is calculated from the maximum of the three brightness sensors. The
calculated dusk value can be sent and a day/night recognization can be activated.

Wind sensor
The wind sensor can capture the current wind speed and cause actions according to adjusted
tresholds. So alarms, e.g. for shutter actuators, can be created.

Temperature sensor
The temperature sensor can be parameterized with up to two tresholds and send telegrams
according to the adjusted thresholds.