MDT Technologies SCN-RT2UP.01, Руководство пользователя

Страница: 6 / 57

Technical Manual Temperature Controller
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
6
Figure 3: Exemplary circuit diagram SCN-RT4UP.01
2.4 Functions
The temperature controller contains of 6 channels. Every channel can capture a temperature and
give out a control value.
The controller contains of 5 different sub menus, which are divided in the following way:

Setup general
General settings can be made at this menu and the used device can be chosen. These
adjustments are only available once and refer to all of the 6 channels.
The following sub menus are for every of the 6 channels available and individual parameterize able:

Temperature measurement
The settings for the measurement for the temperature can be made at this menu. Settings
for the min/max values and the sensor configuration are available at this parameter.
All sensors contain of an in-plant balance.

Alarm/Messages
Alarms and messages can be adjusted at this menu. This alarms and messages report when
the temperature falls below an adjusted value or exceed an adjusted value.

Controller general
At this menu, the desired function (heating, cooling or heating & cooling) can be assigned
and general settings, like setpoints, can be adjusted.

Controller settings
This menu appears as soon as the controller has got a function assigned. Integrated
controllers can be chosen at this menu and the chosen controller can be parameterized
further.