MDT Technologies SCN-IP000.03, Техническое руководство

Страница: 45 / 57

Technical Manual – IP Router SCN-IP100.03
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
45
45
5.2.4 Status Reports
The figure below shows the available settings (here at the example of Status report 1):
Figure 33: Settings – Status report
The following table shows the settings available for an activated Status report:
ETS-Text
Dynamic range
[Default value]
Comment
Send condition

fixed day in the week

fixed date in month

Object „Send status“
Setting when the status report
should be sent.
Send email to destination
address 1

yes

no
Setting whether to send to
recipients 1
Send email to destination
address 2

yes

no
Setting whether to send to
recipients 2
Send email to destination
address 3

yes

no
Setting whether to send to
recipients 3
Status element 1-30

not contained in E-Mail

contained in E-Mail
Setting whether the status
element should be displayed in
the email
Table 20: Settings – Status report
The status report can be sent cyclically, once a week, once a month as well as being transmitted via
object.
Each activated Status element can be integrated in the status report. All activated Status elements
are displayed in the status report as follows:
Name of the status element: value of the status element
The table below shows the available communication objects:
Number Name Length Usage
5 Status report 1 1 Bit Sending the status report; is displayed only
when the send condition is set to “object”
+1 next Status report
Table 21: Communication objects – Status report