Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
149
149
4.10.4.4 Holidays
For each of the 20 functions a behaviour during an active holiday function can be defined:
Figure 86: Settings: Time switch - Holiday function
The following table shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Holiday
•
inactive
•
active
Activate/deactivate the holiday
function for this function
Behaviour if holiday
function active
•
lock time switch
•
execute time switch
•
behaviour as Sunday
Setting the action active during
holiday
Behaviour if holiday
function not active
lock time switch
execute time switch
These settings are not
selectable but also result from
the setting " Behaviour if
holiday function active".
Behaviour at lock by
holiday function
•
no action
•
fix value (one time)
•
fix value (cyclic)
Setting the action when the
holiday sets the lock
Value for lock by holiday
function
Value range according to set
function
Only visible if " Behaviour at
lock by holiday function " is set
to "fixed value...".
The set value is sent by the
holiday function when locking
is performed
Behaviour at unlocking / reset
Holiday function
•
execute basic settings
•
make up switching
times
•
send fix value
•
no action
Setting for the action "Blocking
end"/"End of holiday".
Table 148: Settings: Time switch - Holiday function
