![background image](http://html1.mh-extra.com/html/mdt-technologies/be-bzs86-01/be-bzs86-01_technical-manual_1757461140.webp)
Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
140
140
4.10.3.6 Blind/Shutter
The blind/shutter function is used to control shutter actuators.
The following figure shows the available settings:
Figure 79: Settings - Blind/Shutter
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Assignment of push
buttons
▪
Up/Down
▪
Down/Up
Setting the key assignment
(left/right button) for the
up/down function
Operation function
▪
Long=move /
Short=Stop/Slats Up/Down
▪
Short=move /
Long=Stop/Slats Up/Down
▪
Short=Up/Down/Stop (MDT
Single Object Control)
▪
Short=Up/Down/Stop /
Long = central object (MDT
Single Object Control)
Setting whether to move with
a long key or with a short key;
Table 138: Settings - Blind/Shutter
Two communication objects are displayed for the "blind" function: the object "Stop/slat open/close"
and the object "blinds up/down “.
The moving object is used to move the blinds/shutters up and down. The stop/step object is used to
adjust the slats. In addition, this function stops the up/down movement as far as the end position has
not yet been reached.
In the case of the two-button function, the key assignment can be set; the table below shows the
relationships:
Table 139: Two-button function - Blind function
Function Up/Down
Function Down/Up
Input
Push button left
Push button right
Push button left
Push button right
Moving object
Up
Down
Down
Up
Stop/Step object
Stop/slats open
Stop/slats close
Stop/slats close
Stop/slats open