MDS Mosfet C2, Инструкция по установке и руководство пользователя

Страница: 11 / 16

4 Ohm Speaker 4 Ohm Speaker 4 Ohm Speaker 4 Ohm Speaker
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
S
PEAKER CONNECTIONS (BRIDGED)
The MDS amplifiers are capable of being bridged in a mono configuration. This feature
allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel.
In this configuration the amplifier sums the right and left channel to deliver one channel
(mono) output.
Please note: in order for the amplifier to sum right and left signal information, both right
and left RCA connections must be made.
**CAUTION!
In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any
lower than 4 Ohms will cause the amplifier to overheat and possibly cause permanent damage
to the amplifier!
10
+ +
4 Ohm Speaker 4 Ohm Speaker
FUSE
BRIDGE MODE
+12V
20A
R L
SUPPLY REMOTE GROUND
-
+
-
- + +
25A 25A
BRIDGE MODE
SPEAKERS
FRONT
REAR
R L
+
-
-
+
-
+
FUSE
+12V
SUPPLY REMOTE GROUND