http://www.mdrelectronics.com/
| © at MDR Electronics 2010
Page 4
IMAGE
FEATURES
Connectors: XLR, TRS1/4", RCA, TRS1/8", TT and MIDI
Cable Wiring Display clearly shows which pin is wired to what.
The Cable Wiring Display clearly shows continuity, opens and shorts for each
pin.
Installed Cable Testing: Connect the tester to one end of the cable and see if any
of the lines are shorted together. Then, connect a shorting connector onto the
other end of the cable and if the lines are good, the Cable Wiring display will
show them as all shorted to each other.
Test Tone Generation: The tester generates a 1 kHz or 440Hz tone.
Grounded Shield Detect: Confirms that the XLR connector shield is connected to
Pin 1 (grounded).
Runs on 9v Dc batteries (not included).
