MDM Dog Kennel 7.5'x7.5'x4' Скачать руководство пользователя страница 7

Страница: 7 / 8

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING
OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Installing the Canopy

Check with the parts list, make sure all the parts are included.

1. Find the 6pcs #18 Roof Tube & 6pcs #19 Horizontal Tubes. Connect them by #21 (3-way fitting) &

#22 (4-way fitting).

2. Put the tarp (#26) over the finished frame and secure the 4 corners first by using the Ball Tie

Downs (#27). Then place the Ball Tie Downs through the balance of the metal Eyelets on the tarp
and connect it to the frame.

3. Then slide the 6pcs #20 (Vertical Tubes) into the fittings as in the Canopy Part drawing.

Connecting the Canopy with the Kennel

When the Canopy is finished, move it over to the Kennel, let each of the 2 vertical tubes stand side by side
as in the final assembled drawing. Then connect the two tubes by Pipe Clamps (#23), tightening them by
using #24 (bolts) and #25 (nuts).