Quick Start
../..
Hand wheel
10"Fan
DMX In/Out
IEC AC
inlet
LCD screen
Keyboard
DMX/RDM DIGITAL FAN
Installation
The MDG
theFan
comes ready to use.
It can be suspended from a truss via a Omega clamp or a Half
Cheeseborough clamp, or it can be simply placed on a horizontal
surface on its vibration feet.
Connect the data wiring (DMX or RDM), if you want to use
remote control
Plug the IEC power cord (90–250 VAC, 50-60 Hz, 100 W)
Block the hand wheels
Switch on the power
The MDG
theFan
is now ready to be used.
… For further details, please read the
Operating Guide.
DMX / RDM
The MDG
theFan
has two personalities:
Mode 1 Channel
1.
Fan Off < 10% (26)
Fan Speed, from low (10%) to high (100%)
Mode 2 Channels
1.
Fan Off < 50 % (128)
≤
Fan On
2.
Fan Speed, from low (0%) to high (100%)
The MDG
theFan
is implemented with the most common RDM parameters.
Menu Tree
1.
FAN
On/Off
Mode 2 Channels only
/
DMX Channel #1
2.
Output
0 – 255
Mode 1 Channel
/
DMX Channel #1
Mode 2 Channels
/
DMX Channel #2
3.
DMX Add
1 – 511
Can also be set via RDM
4.
DMX Pers
1 CH – 2 CH
Can also be set via RDM
5.
Mode
Auto / Local / DMX
In AUTO, DMX controls always take precedence over Local commands
6.
Firmware
1.xxx
7.
Dev. ID
xxxxx
Label ID. Can only be set via RDM
8.
UID
xxxxx
RDM Unique ID
