MDG Mega Max, Руководство пользователя

Страница: 6 / 9

6 / 9
The Mega Max
TM
/ Mini Max
TM
Fogger is ready to produce fog. The amount of
the fog emission can be controlled by adjusting the fog output adjustment knob
on the remote control (see page 2).
The temperature is maintained within a narrow margin (the HEAT yellow LED
turn on and off from time to time to indicate the control of temperature) otherwise,
an error condition will result and the Fog Generator will shut down.
When one of
the safety system is activated, the HEAT yellow LED will start blinking indicating
the fail mode.
Shut down the main power switch, wait 2 to 3 minutes and retry
the generator. If the fail mode still appears, unplug your Fogger and return it to
an authorized service centre for verification.
The FOG ON signal (green LED) can be applied to produce fog for as long as the
ready level is reached and all other control parameters are within specifications.
When the “FOG ON” signal is removed, the AES
TM
cycle is automatically initiated
to clear the heating modules. Never remove the power to a Fogger while it is
producing fog
– See the shut down procedures.
The 100% Duty cycle is continuous with specified line voltage, and will degrade
with line voltage loss. If that is the case, reducing the fog output can compensate
it.
SHUT DOWN PROCEDURES
The Fogger must never be shut down while making Fog. To power off a Fogger
the following sequences must be observed:

Always turn off the fog emission;

Wait a few seconds for the AES
TM
cycle to complete;
Power off the Fogger by switching off the “MAIN POWER SWITCH
”
or by
removing the MAIN POWER;