manualshive.com logo in svg

MDC XT14E 2021, Руководство пользователя

Владельцы MDC XT14E 2021 могут получить бесплатное руководство по эксплуатации на нашем веб-сайте. Просто загрузите его с manualshive.com. Это подробное руководство поможет вам полностью ознакомиться с вашим палаточным прицепом и его функциями, чтобы наслаждаться беззаботными приключениями на природе.

Поделиться
Скачать
background image

www.marketdirect.com.au   

    

Ph: 1300 494 494

6

Safety Information 

 

WARNING

 - Before using this product, you should read this manual, and those manuals 

supplied by component manufacturers applicable to this product. 

This manual is supplied as a reference to required maintenance of the product. Failure to use and maintain the 
product in accordance with what is outlined in this manual may affect your warranty.

 

Incorrect and/or insufficient maintenance may cause product failure resulting in property loss, damage or 
injury or death. Maintenance intervals are critical for normal use, extreme use may require shorter or additional 
maintenance intervals. Manual content does not imply express or other any warranty, the owner should read the 
limited warranty terms included in this booklet.

 

Before using this product, you should be certain your tow vehicle is suitably rated and equipped to tow the product 
safely and legally. The trailer and vehicle pairing must we within the safe

 

“Maximum Towing Capacity”, 

“Ball Weight Capacity” and “Gross Combination Mass” as stated by the vehicle manufacturer.

 

This caravan is fitted with electric brakes and a “Breakaway System”. Requirements for breakaway systems can 
vary from state to state. It is mandatory to supply a maintenance charge to the breakaway battery source while 
driving. You MUST ensure this capability is fitted to your vehicle. The maintenance charge is supplied to the 
caravan via the Anderson plug on the drawbar. 

WARNING: BALL LOADING (DOWNWARD LOAD ON TOW HITCH) MUST NOT EXCEED 350KG OR THE 
MAXIMUM ALLOWABLE LOAD BY THE VEHICLE MANUFACTURER OR TOW BAR RATING, WHICH EVER IS 
THE LOWEST. Exceeding these limits may result in an accident causing serious injury or death and/or property 
damage. 

It is important to load your caravan correctly to distribute weight evenly and achieve a suitable ball weight load and
prevent loading in a manner that can cause a Caravan to sway and/or roll excessively left and right. The industry 
optimum ball weight on a caravan is between 9 and 11% of the total Caravan weight. MDC Caravans fit into this 
category and 10% should be used as the starting point.

 

Modifications to The Product

Gas Systems
The installed gas system on this product is an approved and certified installation. Any changes, modifications or 
adjustment may render the system non-compliant and dangerous. Market Direct Group Pty Ltd does not condone, 
recommend, or otherwise consent to any modifications, adjustment, addition or tampering in any way with the 

installed gas system on any and all products.

 

Chassis

  

All MDC chassis are fully engineered and verified using Finite Element Analysis (FEA) software. This ensures that the 
chassis for each model passes the relevant regulations and design rules as originally provided to the customer. Any 
modification to the chassis or drawbar whatsoever (no matter how minor) will inevitably change this – whether it 
impacts the towing dynamics, expected loads and stress points, safety chain attachment points,

 

overall trailer length etc. 

 

Market Direct Group Pty Ltd does not condone, recommend, or otherwise consent to any modifications, adjustment, 
addition or tampering in any way with the drawbar, safety chains or safety chain attachment points.

Содержание XT14E 2021

































































































Отзывы:

Нет отзывов

Похожие инструкции для XT14E 2021

Quattro 600 Electronics Installation Manual, User Information And Troubleshooting preview
600
Бренд: Quattro Страницы: 9
LAIKA Kreos 5009 Manual preview
Kreos 5009
Бренд: LAIKA Страницы: 126
Jayco JAY SERIES Owner'S Manual preview
JAY SERIES
Бренд: Jayco Страницы: 110
LAIKA Ecovip H 2109 Manual preview
Ecovip H 2109
Бренд: LAIKA Страницы: 126
MDC XT16HR Series Owner'S Manual preview
XT16HR Series
Бренд: MDC Страницы: 107

Бренды по названию

Популярные бренды

Загрузить еще бренды