MDC XT12HR 2021, Руководство пользователя

Страница: 71 / 89

67
24 MONTHS / 20,000KM SERVICE
CHECKED
Chassis and Suspension
Hitch
• Inspect for damage and lubricate. Check bolt Torque to 90Nm
Jockey Wheel
•
Inspect for condition and operation
Breakaway
•
Check for correct operation .
•
Inspect lanyard and clip
Drawbar • Inspect wiring grommets and general condition
Suspension
•
Torque bolts to 190Nm
• Grease bushes and check for play.
•
Check torque on suspension hanger bolts (190nm)
•
Check retaining chain shackles tight.
•
Inspect shock absorber for condition.
•
Inspect shock absorber bushes
Brakes
• Inspect and adjust. Check lining thickness and drum wear
Wheel bearings
•
Replace bearings, seals and lubricate. Check stub axle condition and
wear. Replace split pin.
Wheel Nuts
•
Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres
• Inspect for abnormal wear, damage, and pressure.
•
Check manufacturing date less than 5 years.
• Check sidewalls for perishing and damage
12 volt electrical
Lights
•
Check all trailer lights are functioning .
• Check plug pins have gap.
•
Check for corrosion
Battery
•
Check terminals and voltage at full charge.
• Check batteries are secure in cradles
Charging
•
Check battery charger settings are correct.
• Check DC to DC charger settings are correct
Solar Panels
• Check panels are free of damage.
•
Inspect sealants on cable penetrations and junction boxes
Cables
•
Inspect cables under body for damage to conduits.
•
Inspect cable glands and sealants on penetrations through floor
240 volt Electrical
RCD Unit
•
Check operation of RCD via test button
Mains Input • Inspect mains input plug and cover are free of damage
Earthing
•
Carry out resistance check
Caravan Body
Hatches & Doors
•
Check and lubricate locks
Seals
• Check condition and correct latch/lock adjustment for correct 30 -50%
compression
Body
•
Inspect joint sealants inside and out
• Ensuite joints checked for damage and adhesion
•
Inspect for soft spots on floor
General fixings
•
Check all structural fixing are secure.
Ventilation
• Inspect for obstruction and vents operating correctly
Fire Extinguisher
•
Inspect extinguisher is charged and within service date
Smoke Alarm
•
Test and inspect.