MDC Robson XTT 2015, Руководство пользователя

Страница: 31 / 108

www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I P a g e | 27
Setting up your Camper
Choosing a Spot to Set Up
When choosing a spot to set up your camper, start with a flat area with no overhanging trees. Birds and bats
occupying trees can defecate leaving droppings on your camper that can damage paint and canvas and leaves
and sap can also taint the canvas. Ensure you are not camping in an area prone to flooding or with bad drainage
in the event of rain. Even the slightest hollow in the ground can put you in a mini lake. In hot weather if possible,
set your camper up so the sun’s arc goes from front to back or back to front with the annex/awning in the
general direction the sun is arcing across. Doing this will keep the bulk of the camper in shade and the inside
cooler as it will be protected by the tropical roof and shaded by the awning.
Levelling Your Camper
The stabiliser legs on your camper are not designed for supporting the full weight of the trailer, they are there to
stabilise it once it is level. Using your stabilisers as a lifting mechanism will void your warranty as will extending
them with a “rattle gun” or “impact wrench”. Levelling front to back can be done by raising and lowering the
jockey wheel prior to adjusting the stabiliser legs. Getting the trailer level from left to right should be done with
drive on stepped ramps as illustrated below. Once levelled the legs can be lowered to keep the trailer stable. On
soft ground you may want to use timber sole boards under the stabiliser feet.