ASSEMBLY INSTRUCTIONS
FIG.1
Find a clean, level place to begin the assembly of your
Table Tennis Table. The table will be assembled upside
down and then turned over. This is a heavy game and
turning it over will require at least two strong adults.
Remove all of the contents from box and verify that you
have all of the listed parts as shown on the Parts List.
Carefully cut or tear the four carton corners so that the
bottom of the box can act as your workarea.
3. Place Table Surface - A (#1) with the painted surface facing
down on a flat surface.
4. Attach the Curved Inner Leg (#6) to the Table Surface - A
(#1) using three Leg Brackets (#19) and twelve Screws
(#18).
See FIG.1.
5. Unfold the Curved Outer Leg (#5).
6. Repeat the steps above for the Table Surface - B (#2).
FIG. 1
x1
x1
1
1
1
2
2
x24
18
18
x6
19
19
29
28
x2
6
Center
Player
NOTE: Make sure that the oval cut-out in the Leg
Bracket are facing the center of the table for proper
installation.
6
5
23
22
24
17
10
9
3
