Mode:AUTO Menu
Temp:22°C Fan:A
21.0°C 21.04
OFF
Esc Off Set
< Crono >
Esc Set
< Data e Ora >
Esc Off Ok
< Sleep >
Esc 02:00 Ok
< Sleep >
1
2
3
4
5
6
50
7 - CONTROL PANEL
To explain
SLEEP
function simply, one can say that it allows to switch off the product starting from a minimum of + 10 minutes compared
to the hour displayed and to a maximum of 23.50 hours. To set the function press Menu with the key at the top on the right then Date and
Time appears on the screen, then scroll with the key at the bottom on the right until Sleep appears, confirm with the Set key. With the key
at the bottom on the right set the shutdown time. To confirm the selection press the key relative to
OK
(at the top on the right) otherwise
with
ESC
(at the top on the left) one exits and the settings are not saved. If the
SLEEP
function is active with
CHRONO
active, the first has
priority, so the product will not switch off at the time programmed on the timer but instead at the time established by the sleep function.
Once the sleep function has been set, the first screen alternately displays the product status (on/off) and the wording
sleep HH.MM. (HOURS-MINUTES).
During adjustment of the sleep function, by pressing and holding the right arrow key, when one reaches 23.50 of the
current day, the panel proposes to stop: release it and press it again to go onto the following day.
Esc
02:00
Ok
<
Sleep
>
Esc
Off
Ok
<
Sleep
>
Esc
Off
Set
<
Chrono
>
21.0°C
21.04
OFF
Mode: AUTO
Menu
Temp: 22°C
Fan: A
Esc
Set
<
Date and Time
>