A
50
30-CLEANING
CLEANING THE STOVE CLADDING
Below are a few indications to clean the metal cladding of the stove:
•
use only water, if necessary with the addition of neutral detergents (pH7) and characterised by light additives.
•
use only water on a cloth. There are electrical parts that could be damaged.
•
use soft, non-abrasive cloths. Do not rub the surfaces.
•
do not use solvents, abrasive or scratching agents. Do not use prepared compounds for cleaning paints as they could be aggressive.
CLEAN THE HEAT EXCHANGER AND THE COMPARTMENT BENEATH THE BRAZIER EVERY 2/3 DAYS
Cleaning the heat exchanger and the compartment beneath the brazier is a simple operation but very important if the brazier is to
maintain optimal performance.
•
Clean the pipe unit -
Using lever “A” located under the tank cover, vigorously shake the turbulators 5-6 times. This will remove any
soot that has deposited in the exchanger’s smoke ducts during normal stove operation.
CLEAN GRATE
Only for “MATIC” products with automatic brazier cleaning system.
With every shutdown, cleaning starts automatically.
If the brazier is too soiled, manual activation is possible, to help remove the ash.
When the “CLEAN GRATE” function is started, the bottom of the brazier opens to let the ash fall
through into the pan and make cleaning easier for the user.
The brazier closes automatically when the product is turned on.