background image

11

2-INSTALLATION

Technical Dept. - All rights reserved - Reproduction prohibited

The instructions in this chapter refer explicitly to the Italian installation regulation UNI 10683. In any case, 

always observe the regulations in force in the country of installation.

PELLETS

The pellet is obtained from natural dried wood sawdust (without paint). The compactness of the material is guaranteed by the lignin 

contained in the wood itself, without glue or binders.

The market offers different types of pellets with characteristics that vary according to the wood mixtures. The most common diameter on 

the market is 6 mm (although 8 mm diameter is also available) with a length, on average, between 3 and 40 mm. A good quality pellet 

has a density of between 600 and 750 or more kg/cubic metres and a moisture content that accounts for 5 to 8% of its weight.

Pellets have technical advantages besides being an ecological fuel, as the wood residue is used completely, thereby achieving cleaner 

combustion than that of fossil fuels.

While good-quality wood has a calorific value of 4.4 kW/kg (15% moisture, after about 18 months of seasoning), that of pellets is around 

4.9 kW/kg. To ensure good combustion, the pellets must be stored in a dry place and protected from dirt. Pellets are usually supplied in 15 

kg bags, therefore, storing them is very convenient.

Good quality pellets guarantee good combustion, thereby decreasing harmful emissions into the atmosphere.

The poorer the quality of the fuel, the more often the internal parts of the brazier and combustion chamber need to 

be cleaned.

The main quality certifications for pellets currently available on the European market guarantee that the fuel complies with class A1/

A2 according to ISO 17225-2. These certifications include, for example, ENPlus, DINplus, Ö-Norm M7135, and specifically assure that the 

following characteristics are complied with:

• 

calorific value: 4.6 - 5.3 kWh/kg.

• 

Water content: ≤ 10% of the weight.

• 

Percentage of ash: max 1.2% of the weight (A1 less than 0.7%).

• 

Diameter: 6±1/8±1 mm.

• 

Length: 3-40 mm.

• 

Content: 100% untreated wood without the addition of binding agents.

The company recommends using certified fuel for its products (ENPlus A1, DINplus, Ö-Norm M7135).

The use of pellets that do not comply with the characteristics specified previously may compromise the operation of 

your product and therefore invalidate the warranty and product liability.

15 Kg BAG OF PELLETS

Содержание CLUB AIR 10 M2





































































Отзывы: