650-076
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Functions:
1.
MODE: Browsing and adjustments.
2.
: Value adjustment (up).
3.
: Value adjustment (down).
This device has three different possibilities to display data. These different pages you can browse by using the
MODE-button. Depending on the page you can read the following values:
1.
Picture:
•
A: The current time.
•
B: The electric power of the plugged consumer load.
•
C: Accrued energy cost of the duration of measurement.
2.
Picture:
•
A: The adjusted current electricity rate.
•
B: Electric power consumption of the duration of measurement in
kWh.
•
C: Accrued energy cost of the duration of measurement.
3.
Picture:
•
A: Current duration of measurement.
•
B: Working duration of the plugged consumer load.
•
C: Working duration of the plugged consumer load in percent to see
the ratio of it and the duration of measurement.
Operation and Adjustment:
•
Press
as well as
simultaneously for about 5 seconds to enter the adjustment-menu. Move between
the digits with MODE. The values itself can be adjusted with
and
.
•
First you can set up the time (hours: minutes) and the day of the week. After you set up the value of
one digit correctly you can jump to the next by using the MODE-button. When the setup of the day of
the week of is completed press the MODE-button once more to browse to the next site.
•
Now you can enter the first electricity rate. Here the first value represents the starting time when this
rate is being valid and the second value is its cost per hour. With the help of
and
you can choose a
number between “0” and “9” for every single digit. After you set up the value of one digit correctly you
can jump to the next by using the MODE-button. Finally you browse to the page of the setup of the
second electricity rate.
•
The procedure of the adjustment of the second electricity rate equals the first one. Here the first value
represents the starting time when this rate is being valid and the second value is its cost per hour. With
the help of
and
you can choose a number between “0” and “9” for every single digit. After you set
up the value of one digit correctly you can jump to the next by using the MODE-button.
•
When the final value is set the adjustment will be saved after 5 seconds automatically and you leave the
adjustment-menu.
