MCO Home MCOEMH-3901 Скачать руководство пользователя страница 5

Dimensions

104 x 104 x 20 mm

Hardware Platform

SD3502

EAN

6928954250002

IP Class

IP 20

Voltage

9 - 24V

Load

0,5 A

Firmware Version

02.02

Z-Wave Version

06.07

Z-Wave Product Id

0x015f.0x3902.0x5102

Frequency

Europe - 868,4 Mhz

Maximum transmission power

5 mW

Supported Command Classes

Basic

Sensor Multilevel

Thermostat Mode

Thermostat Operating State

Thermostat Setpoint

Transport Service

Association Grp Info

Device Reset Locally

Zwaveplus Info

Supervision

Configuration

Manufacturer Specific

Powerlevel

Firmware Update Md

Association

Version

Security 2

Explanation of Z-Wave specific terms

Controller

 — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall

controllers.

Slave

 — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.

Primary Controller

 — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.

Inclusion

 — is the process of adding new Z-Wave devices into a network.

Exclusion

 — is the process of removing Z-Wave devices from the network.

Association

 — is a control relationship between a controlling device and a controlled device.

Wakeup Notification

 — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.

Node Information Frame

 — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.

(c) 2022 Z-Wave Europe GmbH, Antonstr. 3, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwave.eu. The template is maintained by 

Z-Wave

Europe GmbH

. The product content is maintained by Z-Wave Europe GmbH , Supportteam, [email protected]. Last update of the product data: 2022-10-13

13:20:15

Содержание MCOEMH-3901






Отзывы: