6
To Default the Receiver
(delete all sensors and Remotes)
You can default your
ICON - WRX
in case you make a mistake, or are unsure of
your receiver setup. "Defaulting" your receiver will cause
all
all detector & remote
detector & remote
codes to be erased
codes to be erased
.
To default your receiver, follow these steps:
1.
Set all dipswitches on Bank 1 to ON.
2.
Press & Hold the delete button for 1 second.
3.
All LED's on the receiver will flash once together to confirm that the receiver
has been defaulted.
4.
Return all dip switches back to the OFF position.
Other information
Ø
Your detectors will automatically transmit a low battery report to your
ICON - WRX
receiver when the batteries are nearly flat.
Ø
The low battery report code is also transmitted after the alarm code, every
time a detector is triggered.
Ø
The
ICON - WRX
will give a Low battery output ( it will switch low for 1
second ) to indicate that the detector has a flat battery.
Ø
The tamper output will switch low for 1 second whenever the front case is
removed and the tamper switch is operated on a Wireless PIR Detector or
Wireless Reed Switch.
1 2 3 4 5 6 7
Bank 1
ON
OFF
1 2 3 4 5 6 7
Bank 1
ON
OFF
