MClimate Bobbie B-05, Руководство по установке, Страница: 11 / 24

Installation
3. Disconnect the power wires.
Use the stickers provided in the kit to indicate the
purpose of each of the water heater power lines.
Labels are labeled with L, N and symbols. Stick
each tape onto the wire with the appropriate
symbol. The symbols can be found on the terminal
to which each wire is connected. Once you have
tagged the wires you can disconnect them from
the terminals.
4. Put the pattern on the wall.
Place the template on the designated
mounting location to mark the drilling
points on the wall.
L N
Use a mains tester to make sure that there is no
voltage in the supply wires.