McLelland PLA2, Руководство пользователя, Страница: 4 / 5

* Two Channels Model – 120W RMS/Per
Channel
* Stereo into 4-8 Ohm loads.
* Bridged mode 240W output for 70V or
100V (Direct Drive)
* Power down after ~15 minutes of no signal a
nd com ply with Energy Star Power
consumption limits of < 0.5W in standby.
* RED LED (Front Panel) to indicated Standby
mode is active. * Terminal Block analog audio inputs.
* Selection for Power-Up mode.
* Switch for High Pass Filter.
* Natural cooling without Fan.
* TRIGGER could be external remoting
ON/OFF.
* Short circuit protection.
* Overheating protection.
* Optional accessory card slot for Dante
Receiver.
Frequency Response
Signal to Noise
Input Sensitivity
Gain Value
Input Impedance
Maximum Input Level
Trigger In/Out
FEATURE
TECHNICAL SPECIFICATIONS
Stereo Mode (all channels driven)
120W x 2, 8 Ω (31 V) RMS output (steady state), per channel @ < 1 % THD+N
120W x 2, 4 Ω (22 V) RMS output (steady state), per channel @ < 1 % THD+N
20 Hz - 20 kHz, +/- 2 dB @ 4
Ω
Load
>90dB @ 1W(20 Hz - 20 kHz)
1.0V (+0dBu) @ Max Output 4
Ω
25 dB @ 4
Ω
>10k, Balanced.
12.3 V (+24 dBu)
DC 12V
Bridged Outputs For 70V/100V (Switch at “HIZ” position)
240W, 70V @ < 1 % THD+N 240W, 100V @ < 1 % THD+N
High Pass Filter
Input Connector
Trigger Connectors
Output Connectors
Dimensions
Net Weight
Power Requirements
80 Hz(±2dB)
5 pin Euro terminal
3.5 mm Jacks
4 pin Euro terminal (4
Ω
/8
Ω
) 2 pin Euro terminal (70V/100V)
214mm(W) x 249.8mm(D) x 44mm(H)
1.94 Kg
100 - 240 VAC, 50 - 60 Hz, 350W
4